Huawei TaiShan 200 Series User Manual page 68

TaiShan 200 Server
User Guide (Model 2280)
2.
Step 6 Check that the new cable is properly connected.
Power on the server, and ping the IP address of the peer device. If the peer device
cannot be pinged, check whether the cable is intact or the connectors are securely
connected.
Step 7 Bind the new optical cable.
Issue 04 (2020-01-16)
Figure 5-19 Removing an SFP+ cable
Connect the new SFP+ cable.
Remove the dust-proof cap on the port, and insert the cable connector into
the port. See Figure
When you hear a "click" sound and the cable cannot be pulled out, the connector is
securely connected.
Figure 5-20 Connecting an SFP+ cable
Copyright © Huawei Technologies Co., Ltd.
5-20.
5 Install and Configure
61