Initial Configuration; Default Data - Huawei TaiShan 200 Series User Manual

TaiShan 200 Server
User Guide (Model 2280)
●
●

5.10 Initial Configuration

5.10.1 Default Data

Table 5-5
Table 5-5 Default data
Item
iBMC
management
network port
data
Issue 04 (2020-01-16)
NO TICE
A forced power-off may cause data loss or program damage. Forcibly
power off the server only when necessary.
Power off the server using the Remote Virtual Console.
a. Log in to the Remote Virtual Console. For details, see
the Remote Virtual
b. On the KVM screen, click
c. Choose Power Off or Forced Power Off.
A dialog box is displayed.
NO TICE
A forced power-off may cause data loss or program damage. Forcibly
power off the server only when necessary.
d. Click Yes to power off the server.
Power off the server using the iBMC CLI.
a. Log in to the iBMC CLI. For details, see
b. On the iBMC CLI, run the ipmcset -d powerstate -v 0 command to
power off the server or the ipmcset -d powerstate -v 2 command to
forcibly power it off.
NO TICE
A forced power-off may cause data loss or program damage. Forcibly
power off the server only when necessary.
c. Enter y or Y to power off the server.
lists the default data for configuring the server.
Name
IP address
and subnet
masks
Copyright © Huawei Technologies Co., Ltd.
Console.
or on the menu bar.
8.2 Logging In to the iBMC
Default Value
● IP address: 192.168.2.100
● Subnet mask: 255.255.255.0
5 Install and Configure
8.1 Logging In to
CLI.
68