Huawei TaiShan 200 Series User Manual page 87

TaiShan 200 Server
User Guide (Model 2280)
You can change an iBMC user password on the iBMC WebUI or CLI. The following
describes how to change a user password on the iBMC WebUI. For details about
operations on the iBMC CLI, see the
Changing the Initial Password of the Default iBMC User
Step 1 Log in to the iBMC WebUI and open the Local User page.
●
●
Step 2 Modify user information.
●
Issue 04 (2020-01-16)
● The default iBMC user account is Administrator.
● U-Boot is a piece of underlying software used to configure basic settings, for example,
initializing hardware devices and setting up memory space mapping, to prepare for
commissioning the OS.
● To ensure system security, change your initial password at your first login and change
the password periodically.
● A simple password is easy to crack, which makes the system vulnerable. You are advised
to use a password that meets complexity requirements or to enable the password
complexity check function.
● The password complexity check function is enabled by default.
If the iBMC version is earlier than V500, choose Configuration > Local Users.
The page shown in Figure 5-38
Figure 5-38 Local Users page (earlier than iBMC V500)
If the iBMC version is V500 or later, choose User & Security > Local Users.
The page shown in Figure 5-39
Figure 5-39 Local Users page (iBMC V500 or later)
If the iBMC version is earlier than V500, locate the user and click
shown in Figure 5-40
Copyright © Huawei Technologies Co., Ltd.
TaiShan Rack Server iBMC User Guide
is displayed.
is displayed.
is displayed.
5 Install and Configure
.
. The page
80