TaiShan 200 Server
User Guide (Model 2280)
Port
PSU socket
2.4 Rear Panel Indicators
Figure 2-11
Figure 2-11 Rear panel indicators
1 GE electrical port data transmission status
indicator
3 Management network port data transmission
status indicator
5 UID indicator
7 Optical port connection status indicator/data
transmission status indicator
Table 2-5 Indicators on the rear panel
Indicator
GE
electrical
port/
Managem
ent
network
port
Issue 04 (2020-01-16)
Type
-
shows the indicators on the rear panel of the server.
Data transmission
status indicator
Connection status
indicator
Copyright © Huawei Technologies Co., Ltd.
Quanti
Description
ty
1/2
Determine the number of PSUs based
on actual requirements, but ensure
that the rated power of the PSUs is
greater than that of the server. You
are advised to configure two PSUs to
ensure reliable device operating.
When one PSU is used, Predicted PSU
Status cannot be set to Active/
Standby on the iBMC WebUI.
2 GE electrical port connection status
indicator
4 Management network port connection
status indicator
6 Optical port transmission rate indicator
8 PSU indicator
State Description
● Blinking yellow: Data is being
transmitted.
● Off: No data is being transmitted.
● Steady green: The network port is
properly connected.
● Off: The network port is not connected.
2 Components
16