Rear Panel Indicators - Huawei TaiShan 2280 V2 User Manual

TaiShan 2280 V2 Server
User Guide
Port
USB port
Management
network port
Serial port
GE electrical
port
PSU socket

2.4 Rear Panel Indicators

Figure 2-9
Figure 2-9 Rear panel indicators
1 PSU indicator
Issue 01 (2019-07-01)
Type
USB 3.0
RJ45
RJ45
RJ45
-
shows the indicators on the rear panel of the server.
Copyright © Huawei Technologies Co., Ltd.
Quantit Description
y
2 The USB ports allow USB devices to be
connected to the server.
NOTE
Before connecting an external USB device,
check that the USB device functions properly. A
server may operate abnormally if an abnormal
USB device is connected.
1 This 1000 Mbps Ethernet port is used for
server management.
1 The serial port is used as the system serial
port by default. You can set it as the iBMC
serial port by using the iBMC command.
This port is used for debugging.
4/8 The mainboard provides GE electrical
ports. A maximum of eight GE electrical
ports can be provided through the two
FlexIOs.
2 Determine the number of PSUs based on
actual requirements, but ensure that the
rated power of the PSUs is greater than that
of the server. When one PSU is used,
Predicted PSU Status cannot be set to
Active/Standby on the iBMC WebUI.
2 GE electrical port connection status
indicator
2 Components
9