Features; Demonstration Software - ST STM32F746G-DISCO User Manual

Features

1 Features
•
STM32F746NGH6 microcontroller featuring 1 Mbyte of Flash memory and
340 Kbytes of RAM, in BGA216 package
•
On-board ST-LINK/V2-1 supporting USB reenumeration capability
ARM
•
•
USB functions: virtual COM port, mass storage, debug port
•
4.3-inch 480x272 color LCD-TFT with capacitive touch screen
•
Camera connector
•
SAI audio codec
•
Audio line in and line out jack
•
Stereo speaker outputs
•
Two ST MEMS microphones
•
SPDIF RCA input connector
•
Two push buttons (user and reset)
•
128-Mbit Quad-SPI Flash memory
•
128-Mbit SDRAM (64-Mbit accessible)
•
Connector for microSD card
•
RF-EEPROM daughterboard connector
•
USB OTG HS with Micro-AB connectors
•
USB OTG FS with Micro-AB connectors
•
Ethernet connector compliant with IEEE-802.3-2002
• Five power supply options:
–
–
–
–
–
• Power supply output for external applications: 3.3 V or 5 V
•
Arduino Uno V3 connectors
• Comprehensive free software including a variety of examples, part of STM32Cube
package
•
Supported by a wide choice of integrated development environments
2

Demonstration software

The demonstration software is preloaded in the STM32F746NGH6 Flash memory. The
latest versions of the demonstration source code and associated documentation can be
downloaded from www.st.com/stm32f7-discovery.
6/49
® ™
mbed -enabled (see http://mbed.org)
ST LINK/V2-1
USB FS connector
USB HS connector
VIN from Arduino connector
External 5 V from connector
DocID027942 Rev 3
UM1907