Features - ST STM32L4P5G-DK User Manual

1

Features

• STM32L4P5AGI6P Arm
Kbytes of RAM in a UFBGA169 package
• 240x240 64‑bit color LCD with RGB interface (connector only)
• 4-Gbyte onboard eMMC
• On-board current measurement
• SAI audio codec (footprint only)
• MEMS digital microphone (footprint only)
• 512-Mbit Octo‑SPI NOR flash memory with DDR mode
• 64-Mbit Octo‑SPI PSRAM memory with DDR mode
• 2 user LEDs
• Reset buttons
• 4-direction joystick with a selection button
• Board connectors:
– 8-bit camera (footprint only)
– Stereo headset jack (footprint only)
– USB with Micro-AB
– User interface through USB Virtual COM port
– Arm
– ARDUINO
– STMod+ expansion connector
• Flexible power‑supply options:
– ST-LINK USB V
• On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Microcontroller supply voltage: fixed 3.3 V and extern SMPS to generate V
• Comprehensive free software libraries and examples available with the STM32CubeL4 MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2651 - Rev 3
® ®
Cortex core-based microcontroller featuring 1 Mbyte of flash memory and 320
® ®
Cortex 10-pin 1.27 mm-pitch debug connector over STDC14 footprint
®
Uno V3 expansion connector
, USB OTG connector, or external sources
BUS
®
, MDK-ARM, and STM32CubeIDE
UM2651
Features
logic supply
core
page 2/37