Installation; Sensor - MICRO-EPSILON colorCONTROL MFA-1 Instruction Manual

Installation

4.
4.1
4-pin M8 connector
DIN-rail mounting
Fig. 1
1) Not available for fixed cables.
colorCONTROL MFA-1
Installation

Sensor

Fasten the cable socket 2 of the supply cable without tension, and screw it tight.
Fasten the sensor with M4 screws, or attach it onto a DIN rail.
25.4 (1.0)
Dimensional drawing for the colorCONTROL MFA-1, dimensions in mm, not to scale
Connect the sensor according to the pin assignment.
Ø 4.1
(0.16 dia.)
20 (0.79)
60 (2.36)
Page 25