Festo CPX DE Series Manual page 83

3. Overview and connecting technology I/O modules
Festo P.BE−CPX−EA−EN en 05602d
Sub−base CPX−AB−4−HARX2−4POL
Please note
In order that completely fitted modules with sub−base
CPX−AB−4−HARX2−4POL comply with protection class
IP65/IP67:
Use plugs type SEA−GS−HAR−4POL from the Festo range
·
(consisting of union nut, strain relief and splicing ring)
for connecting sensors and actuators.
Tighten the union nuts of the plugs at first by hand.
·
Seal the unused connecting sockets with protective
·
caps from Harting (see Accessories, appendix A.9).
Specifications of the cables for the sub−base
CPX−AB−4−HARX2−4POL
Cable cross−sectional area:
Strand cross−section:
Insulation material:
Insulation thickness:
Core diameter:
Cable outer diameter:
2
0.25 ... 0.5 mm
up to 0.1 mm
PVC/PUR/PE
max. 1.6 mm
1.2 ... 1.6 mm
4.0 ... 5.1 mm
3−17