Festo CPX DE Series Manual page 32

1. Pneumatic interfaces
DIL switch setting
Midi/Maxi CPA
Setting not
permitted
1)
Depending on the equipment fitted on the CPX and the field bus node, see following note.
2)
Additionally occupied output addresses remain unused
Tab. 1/2: DIL switch setting
1−12
Setting the DIL switch
VTSA/ISO
Switches
8: reserved
7: reserved
6: reserved
5: reserved
4: OFF/OPEN
3: OFF/OPEN
2: OFF/OPEN
1: ON/CLOSED
8: reserved
7: reserved
6: reserved
5: reserved
4: OFF/OPEN
3: OFF/OPEN
2: ON/CLOSED
1: as desired
8: reserved
7: reserved
6: reserved
5: reserved
4: OFF/OPEN
3: ON/CLOSED
2: as desired
1: as desired
8: reserved
7: reserved
6: reserved
5: reserved
4: ON/CLOSED
3: as desired
2: as desired
1: as desired
Assigned addresses
8 outputs for valves
16 outputs for valves
24 outputs for valves
(factory setting for CPA
With CPA: only 22 can be used
32 outputs for valves (factory setting for
Midi/Maxi and VTSA/ISO
With Midi/Maxi: only 26 can be used
Festo P.BE−CPX−EA−E N en 05602d
1)
)
2)
1)
)
2)