Chapter 4 Sal (Salinity) Measurement; Measurement Target Selection - Horiba Scientific DS-72G Instruction Manual

Chapter 4 SAL (Salinity) Measurement

4.1 Measurement Target Selection

Select measurement target for SAL measurement from sea water or other liquid.
48
1.
Tap the channel setting and measurement item
in the measurement screen to set "CH2" and
"SAL".
2.
Tap and tap "CH2 MEAS SET".
The SAL measurement setting items are
displayed.
3.
Tap on the right of the SAL type item.
4.
When the target for measurement is sea water,
tap "SEA water."
5.
Tap .
The setting applies.