Table of Contents
Advertisement
3.2.5 Alarm Setting
When the measurement values exceed the set upper or lower limit, the instrument detects
it to display the notice on the screen or to output the signal from the external output
terminal.
If the measurement values exceed the alarm range, the color of the pertinent channel
"CH" is changes on the MEAS screen.
Set the upper limit alarm to ON for the upper limit control of measurement value.
Set the lower limit alarm to ON for the lower limit control of measurement value.
Upper limit value
Input Upper or Lower Limit Values
Upper limit value entry
Lower limit value
1.
When selecting ON the Alarm, upper limit item,
the Upper limit value, tap
Upper limit value item.
2.
Enter an upper limit value on the numerical-key
screen.
To change the unit (mS/m, S/m, etc.), tap on
the unit change key on the right of the numerical-
key screen.
3.
Tap
.
The setting applies.
To cancel the settings, tap
on the right of the
.
43
Advertisement
Table of Contents
