Input Upper Or Lower Limit Values; Electrode Model Setting - Horiba Scientific DS-72G Instruction Manual

6.4.1 Input Upper or Lower Limit Values

Upper limit value entry
Lower limit value entry

6.5 Electrode Model Setting

The electrode model setting in COND measurement applies for TDS measurement (refer
to "3.2.6 Electrode Model Setting" (P.45)).
58
1.
When selecting ON the Alarm, upper limit item,
the Upper limit value, tap
Upper limit value item.
2.
Enter an upper limit value on the numerical-key
screen.
To change the unit, tap on the unit change key
on the right of the numerical-key screen.
3.
Tap .
The setting applies.
To cancel the settings, tap
1.
When selecting ON the Alarm, lower limit item,
the Lower limit value, tap
Lower limit value item.
2.
Enter an upper limit value on the numerical-key
screen.
To change the unit, tap on the unit change key
on the right of the numerical-key screen.
3.
Tap .
The setting applies.
To cancel the settings, tap
on the right of the
.
on the right of the
.