Measurement Condition Default Settings (Can Be Set Per Operator) - Horiba Scientific DS-72G Instruction Manual

10.3.2 Measurement Condition Default Settings
(Can Be Set per Operator)
Alarm
condition
Measurement value unit
Conductivity Temperature
measurement setting
condition
Temperature
conversion
Electrode
data
Alarm
condition
Salinity
measurement
condition
Measurement value unit
SAL type
80
Item
Upper limit
value setting
Lower limit
value setting
Upper limit
value
Lower limit
value
Temperature
setting
Temperature
input value in
selecting "MTC"
Temperature
conversion
function
Temperature
conversion
coefficient
Reference
temperature
Model
lot No.
Upper limit
value setting
Lower limit
value setting
Upper limit
value
Lower limit
value
Selection item/
Setting range
Enable, Disable
Enable, Disable
0.003 S/cm to 1.999 S/cm
0.003 S/cm to 1.999 S/cm
S/m, S/cm, FIX
ATC (Automatic temperature
compensation),
MTC (Manual temperature
compensation)
0.0C to 100.0C
Pure water, Natural water,
Manual, Disable
0.00%/C to 10.00%/C
15.0C to 30.0C
Enable, Disable
Enable, Disable
0.00 PPT to 80.00 PPT
(0.000% to 8.000%)
0.00 PPT to 80.00 PPT
(0.000% to 8.000%)
PPT, %
NaCl, SEA water
Default
values
Disable
Disable
1.999 S/cm
0.003 S/cm
S/cm
ATC
25.0C
Manual
2.00%/C
25.0C
None
None
Disable
Disable
80.00 PPT
0.00 PPT
PPT
NaCl