Table of Contents
Advertisement
The unit indication of the cell constant depends on the electrode.
Convert the unit to the one for the meter before input.
-1
100 m
= 1 cm
-1
1000 m
= 10 cm
-1
10 m
= 0.1 m
3.2.2 COND Measurement Unit Setting
40
-1
-1
-1
5.
Tap the left side numerical value to display the
numerical screen.
6.
Enter the numerical value written on the COND
electrode.
7.
Tap
or
COND electrode.
8.
Tap
.
Reflect the setting.
To cancel the settings, tap
You can select S/m, S/cm or FIX (Unit is fixed at
mS/cm as the COND measurement unit.
1.
Tap
on the right of the Unit item.
2.
Select S/m, S/cm or FIX.
The selected unit applies.
to enter the digit written on the
.
Advertisement
Table of Contents
