9.5 Copy all meas. Data
Before copying data, make sure that sufficient capacity is available in the USB memory.
If the copy stops in the middle, turn OFF the power and reboot the instrument, and then
execute the copy again.
9.6 Delete all meas. Data
76
You can save the copy of the measurement data
saved in the instrument into a USB memory. To
execute the copy, connect a USB memory to the
instrument.
1.
Tap
on the right of the Copy all meas. Data.
2.
Tap
to copy the all measurement data. To
cancel the operation, tap
3.
Tap
in the Copy all meas. Data completion
screen.
You can delete all measurement data saved in
the instrument.
1.
Tap
on the right of the Delete all meas. Data
2.
Tap
to delete the all measurement data. To
cancel the operation, tap
3.
Tap
in the Delete all meas. DATA screen.
.
.