Kit Contents, Em430Fx137Rf900; Hardware Installation, Msp-Fet430Pif - Texas Instruments MSP430 User Manual

www.ti.com
Target Socket
Module
MSP-TS430PZ100B
MSP-
TS430PZ5x100
MSP-
TS430PZ100USB
See the device data sheets for device specifications. Device errata can be found in the respective device
product folder on the web provided as a PDF document. Depending on the device, errata may also be
found in the device bug database at www.ti.com/sc/cgi-bin/buglist.cgi.

1.13 Kit Contents, EM430Fx137RF900

• One READ ME FIRST document
• One legal notice
• One MSP430 CD-ROM
• Two target socket module
MSP-EM430F5137RF900: Two EM430F5137RF900 target socket modules. This is the PCB on which
is soldered a CC430F5137 device in a 48-pin RGZ package. A 2×7-pin male connector is also present
on the PCB
MSP-EM430F6137RF900: Two EM430F6137RF900 target socket modules. This is the PCB on which
is soldered a CC430F6137 device in a 64-pin RGC package. A 2×7-pin male connector is also present
on the PCB
• Two CC430EM battery packs
• Four AAA batteries
• Two 868-/915-MHz antennas
• Two 32.768-kHz crystals
• 18 PCB 2×4-pin headers

1.14 Hardware Installation, MSP-FET430PIF

Follow these steps to install the hardware for the MSP-FET430PIF tools:
1. Use the 25-conductor cable to connect the FET interface module to the parallel port of the PC. The
necessary driver for accessing the PC parallel port is installed automatically during CCE/CCS or IAR
Embedded Workbench installation. Note that a restart is required after the CCE/CCS or IAR
Embedded Workbench installation for the driver to become active.
2. Use the 14-conductor cable to connect the parallel-port debug interface module to a target board, such
as an MSP-TS430xxx target socket module. Module schematics and PCBs are shown in
SLAU278F – May 2009 – Revised December 2010
Submit Documentation Feedback
Table 1-2. Individual Kit Contents, MSP-TS430xx (continued)
Socket Type Supported Devices
100-pin PZ
MSP430F67xx
(QFP ZIF)
100-pin PZ MSP430F543x,MSP430
(QFP ZIF) BT5190IPZ
100-pin PZ
MSP430F663x, 'F563x
(QFP ZIF)
© 2009–2010, Texas Instruments Incorporated
Kit Contents, EM430Fx137RF900
Included Devices
Eight PCB 1×25-pin headers (four
2 x MSP430F6733IPZ
male and four female
Eight PCB 1×25-pin headers (four
2 x MSP430F5438IPZ
male and four female
Eight PCB 1×25-pin headers (four
2 x MSP430F6638IPZ
male and four female
Headers / Comment
Appendix B.
19
Get Started Now!