Install the RealPresence Collaboration
Server (RMX) 1800
Perform following procedures to install the RealPresence Collaboration Server (RMX) 1800 in your site:
●
Mount the RealPresence Collaboration Server (RMX) 1800 on a Shelf
●
Connect the RealPresence Collaboration Server (RMX) 1800 to a Power Source
●
Connect Cables to the RealPresence Collaboration Server (RMX) 1800
Note: Considerations for installing RealPresence Collaboration Server (RMX) 1800
To maximize conferencing performance, especially in high bit rate call environments, a 1Gb
connection is recommended for RealPresence Collaboration Server (RMX) 1800.
The equipment must be installed by a trained service person.
Mount the RealPresence Collaboration Server (RMX)
1800 on a Shelf
Perform the following steps to mount the RealPresence Collaboration Server (RMX) 1800 on a shelf.
To mount the system on a shelf:
1 Install the shelf, supplied by the rack manufacturer, in the rack.
2 Mount the RealPresence Collaboration Server (RMX) 1800 on the shelf.
3 Fasten the RealPresence Collaboration Server (RMX) 1800 to the rack with screws through the four
holes in front mounting brackets of the RealPresence Collaboration Server (RMX) 1800.
Polycom, Inc.
20