Telos Zephyr Xstream User Manual page 88

6. Move the cursor to the word Save and then press <SEL> to complete the
entry process.
Editing Location Setups
1. If this setup includes audio information, configure the Zephyr Xstream's
AUDIO menu and front panel mixer assignments as it will be used when
connected to this location. If the existing Audio information included in this
setup is correct, simply activate the setup to recall those settings now (then
drop the call (s) by pressing drop 4 times). If you are creating a Dial Setup
that does not include audio settings, you can skip this step.
2. Configure the Zephyr Xstream with the information ISDN line to be used at
this location (see below). You must make certain that the menu selections
in the TEL and AUDIO (optional) menus are set correctly
3. Press the <AUTO> key. Choose the Location Setup to be edited.
To choose a Location Setup you have two options:
•
Press and hold the <6> to scroll to the list of 30 Location Setups (these
are setups # 100 to 130).
•
Use the Keypad to enter the three‐digit number for the desired setup.
That setup will be displayed and will be highlighted.
4. Once the desired setup is highlighted, press the <SEL> button. The name of
the setup will be displayed. Press <5> and then <SEL> to edit the setup.
5. Edit the name (see the beginning of this chapter section for an example on
how to select and enter information).
You can choose whether to Include Audio settings or not, by selecting this
menu selection. The choices are Tel (no Audio menu information included
with this Location setup) or Tel. & Audio.
6. Move the cursor to the word Save and then press <SEL> to complete the
editing process.
USER'S MANUAL
Section 4: BASIC OPERATION & INSTALLATION 76