Telos Zephyr Xstream User Manual page 85

7. Move the black cursor to the word Save and then press <SEL> to complete
the editing process.
Location Setups
Location setups are a useful feature that allows you to pre‐configure information about the ISDN
line (TEL menu information) and the mixer setup/assignment information (AUDIO menu and
MX/MXP front panel information) for frequently visited locations. Each dial setup consists of
several pieces of information:
•
A Setup number – this three‐digit number can be used to instantly access a
given location setup.
•
An alphanumeric Name
•
TEL menu settings – This is a snapshot of all settings of the TEL menu.
•
AUDIO settings (optional) – This is a snapshot of all settings of the AUDIO
menu. Note, the front panel Left/Right and Snd/Rcv mixer assignments on
the Zephyr Xstream MX/MXP model's front panel are included along with
the settings in the AUDIO menu.
Activating a Location Setup – Step by Step
Note that this process is the same as accessing a Dial Setup, only a three‐digit number is used.
1. Press the <AUTO> key.
2. To choose a Location Setup you have two options:
•
Use the <5> and <6> to scroll through the list of 30 Location Setups.
These are setups # 100 to 129 ‐ may need to press and hold <6> to
scroll past the Dial Setups.
•
Use the Keypad to enter the three‐digit number for the desired setup.
That setup will be displayed and will be highlighted.
3. Once the desired setup is highlighted, press the <AUTO> button to activate
the configuration sequence. Once configuration is complete, the Xstream
will show the following screen:
USER'S MANUAL
Section 4: BASIC OPERATION & INSTALLATION 73