Telos Zephyr Xstream User Manual page 162

USER'S MANUAL
excellent" audio. You have a channel number range available from 1 to 32,767 so there are lots
of numbers to choose from.
In Basic Mode, the backfeeds will have the same channel number as the source channels and
will automatically be configured as "to source". This ensures that your backfeed consists of a
suitable mix‐minus that is automatically created by your Studio Mix Engine.
Livewire Configuration – Expert Mode
There may be a case when you want to use something other than the automatic mix‐minus as a
backfeed. For example, maybe you want to use an AUX bus to create your own custom mix. In
this case, you would use Expert Mode to create the setup. Use the destination drop‐down
boxes to select the Livewire streams that you wish to use as backfeeds to your codec channels.
Remember that these destinations are used to designate the audio being delivered to the codec
inputs. Select "from source" if the Livewire channel you are selecting is not one of the
automatic backfeed channels. Click "apply" and the selected streams will be delivered to the
codec channel inputs.
In this example, the channels used as backfeeds illustrate the "normal" settings you would get
when Basic Mode is used. Changes can be made to these basic settings as required and applied.
Section 8: LIVEWIRE – IP Audio 150
TM