w
HOT TIP!
Please don't use the "voice" processor settings if your source includes musical material. The
fast time constants used in the Voice M and Voice H settings will cause noticeable artifacts if
used on most music.
Music:
This setting offers a slow AGC only.
Low Cut
This is a low cut (pop) filter designed to reduce wind and breath noise. Its characteristics are as
follows: (Per Scott 12/01)
•
Cut off frequency: 80 Hz
•
Slope: 3 dB per octave
AUDIO - Screens 6 & 7
These screens are used to set up Local Monitor Mix 1 (screen 6) and Local Monitor Mix 2 (screen
7). The following options allow the operator to customize the Local Mixes as required for
different applications and as needed to accommodate talents' needs. The following selections
are offered.
h
HOT TIP!
When planning your local mixes, remember that Monitor Mix 2 feeds both the headphone
jacks and line level jacks on the rear panel.
Mon "x" Balance
This adjustment allows you to vary the ratio of Send to Receive audio in Local Mix "x". This
control has no effect if both SND and RCV have not been selected on the front panel.
USER'S MANUAL
Section 11: THE WORKS – Detailed Menu Reference
&
199