The Codec Menu - Telos Zephyr Xstream User Manual

Input Select (not present in 10 Base-T version hardware)
The MX/P Xstreams can be used on a Livewire Ethernet network. It is worth noting that the
Livewire inputs bypass the mixer section and feed the codec directly. The input selection has
the following options:
Mixer:
In this case, the output of the MX/P's mixer section feeds the codec. This can be
considered the usual mode of operation for a MX/P Xstream
Livewire:
When this setting is selected, the mixer is disabled and the codecs input is fed
from the Livewire channel(s) specified. Please refer to Section 8 for details on
Livewire configuration.

11.4 The CODEC Menu

CODEC – Screen 1: Status
This page summarizes the Transmit, Receive, Bitrate & Sample Rate settings. Transmit will effect
whether the far end can receive your audio Receive will effect whether you can receive audio
from the far end. Bitrate and Sample Rate effect transmission in both directions
USER'S MANUAL
Section 11: THE WORKS – Detailed Menu Reference 202