Telos Zephyr Xstream User Manual page 180

Mono
Mono
The basic Mono 112 or 128 kbps ISDN codec connection is shown above. The audio quality is
dependent on the settings in the CODEC menu. ISDN is used end‐to‐end for the best quality and
lowest delay.
In Mono 128 modes, the channel A input is used.
The dialing MODE for these calls is Zephyr.
Mono
Stereo
Mono
Stereo
The Stereo 64 mode is a special case. In this scenario a central codecs sends the same stereo
audio to two sites. The remote‐to‐central return path is mono and can be L3 or G.722.
The dialing MODE for these calls is Zephyr.
USER'S MANUAL
ISDN
Telephone
Network
(2 Calls)
ISDN
(1 Call)
Telephone
Network
ISDN
(1 Call)
Section 10: APPLICATIONS GUIDE
Mono
ISDN
(2 Calls)
Stereo
ISDN
(2 Calls)
2 X Mono
Mono
168