Let's go through a couple of quick examples to see the Zephyr Xstream menus in action.
Example 1: Selecting a setting from a list (i.e. the bit rate):
1. Press the <CODEC> button twice. You should see a screen that looks like the
following:
2. Now press the <6> button twice so the menu item "bitrate" is highlighted
(i.e. is shown with white text on a black background) as shown below:
3. Press the <SEL> button once. Note that the menu item moves to the top of
the screen and information about "Bitrate" is displayed.
4. Press the <6> button repeatedly to view the possible settings for this menu
item (i.e. 56 or 64).
w
IMPORTANT TIP!
You can press the <CODEC> button at any time to "escape" without saving the changes you
have made.
5. Press the <SEL> button to confirm your selection. Or, press <CODEC> to
ignore the change.
USER'S MANUAL
Section 4: BASIC OPERATION & INSTALLATION 63