Telos Zephyr Xstream User Manual page 278

IMPORTANT! The Xstream will reboot after you click Apply if you change the software version.
This will disconnect any calls.
Saving Bank 1 Software
Software is always downloaded to bank 1 (the secondary bank). Downloading software (see
below) will overwrite the software currently in this bank, if any. If you wish to save the software
currently residing in bank 1 you can save it by moving it to bank 1 as follows:
1. Click on the Commit this version to Bank 0 box (see below).
2. Click on Apply. The node will now reboot.
IMPORTANT! The node will reboot after you click Apply if you change the software version. This
will result in loss of audio locally, and at any unit using the local sources. In addition you will
reset your browser connection and will need to reconnect.
Downloading new software
A new software version can be downloaded into bank 1 as follows:
1. Go to the Telos web site: www.telos‐systems.com and download the desired
software update to your computer (this should be the computer that you will use to
access the node's web page) by clicking on the link. Your local computer operating
system should display a prompt to permit you to choose where you wish to locate
the downloaded file. You can choose any convenient location, just be sure to note
the drive and location where the file is to be saved.
2. Open a web browser and connect to the Xstream to be updated. Enter the
complete path and file name for the software file (e.g. the file downloaded from the
Telos site), or click on the Browse button to locate the file. Once the proper path
and filename are displayed, click on Apply to download the file. The download
process is lengthy. Consult the version notes for details.
Section 13: Deep Tech Information and Troubleshooting
USER'S MANUAL
266