Example 2: Entering a numeric entry (i.e. entering a SPID):
1. Press the <TEL> button twice. You should see a screen that looks like the
following:
2. Verify that the menu item "SPID 1" is highlighted (i.e. is shown with white
text on a black background). If not, use the <5> button to highlight this
menu selection.
3. Press the <SEL> button once. Note that the menu item moves to the top of
the screen and information about "SPID 1" is displayed.
4. Press the <5> button repeatedly to erase any existing information.
5. Type in the new SPID number using the Zephyr Xstream's keypad.
w
IMPORTANT TIP!
You can press the <TEL> button at any time to "escape" without saving the changes you
have made.
IF THIS UNIT HAS ALREADY BEEN PROGRAMMED YOU SHOULD PRESS <TEL>
NOW!
6. Press <SEL> to confirm your entry. Or, press <TEL> to ignore the information
and abort the entry process.
More on the Numeric Keypad – Entering Alphabetic Characters
A given keypad button corresponds to the number printed on it. It can also be
used for text entry of the letters below it. Additional characters are available on
the <*> key (i.e. * ( [ ] < > <Space>) and the <#> key (i.e. # . , ; : ! ? <space>) and
underscore is available on the <1> key.
To enter text characters, press the key with the appropriate letter printed near
it. Keep tapping it to cycle through the possible choices. For example, tapping
USER'S MANUAL
Section 4: BASIC OPERATION & INSTALLATION 64