•
Bi‐directional ancillary data: Serial connection at 2400 or 9600 (AAC and Layer 3) bps;
eight contact closures (for end to end transmission or local status and control).
IP Support
•
via Ethernet 100 Base‐T Ethernet port.
•
Uses fixed IP address
•
Port 23 supports Telnet sessions
•
Port 80 used for HTML browser interface
•
Port 8080 supports MPEG streaming in MPEG Layer 3 or AAC
•
Port 5060 for SIP signaling
•
Port 21 used for FTP software updates (10 Base‐T units only).
Software Upgrades
•
Downloadable from Telos; browser based upload via 100Base‐T Ethernet connection.
Control Ports
•
Eight bi‐directional inputs/outputs for end‐to‐end contact closure emulation.
•
Inputs: Open collector, closure to ground. Integral pull up. Supports up to 24 volts DC
inputs
•
Outputs: Sink up to 125 mA to ground. Integral pull up to 5 volts (voltages greater than
5 volts may be used with external pull‐ups)
Resolution
•
Send Input: MPEG 24 bits; G.722 16 bits
•
Receive Output: MPEG 24 bits; G.722 16 bits
Power Supply
•
90‐240 VAC (50/60 Hz) auto‐configuring.
•
100 watts peak
Dimensions, Zephyr Xstream and Zephyr Xstream MX
•
19" (48cm) standard rack mount front panel
•
17 1/8" (43cm) wide behind front panel
•
12 1/2" (32cm) deep
•
3 1/2" (9cm) high
Dimensions, Zephyr Xstream MXP
•
18 1/4" (46cm) wide
•
14" (36cm) deep
•
4 1/4" (11cm) high
Shipping weight
•
13 pounds (5.9 kg) (MXP)
•
9 pounds (4 kg) (non‐mixer)
CE approved
All specifications subject to change without notice
USER'S MANUAL
Section 14: SPECIFICATIONS and WARRANTY
295