Telos Zephyr Xstream User Manual page 193

Zephyr Xport at the far end
When Xport is on ISDN use the "Zephyr" Dial Mode selection on the dialing Xstream or Xport:
•
Transmit ‐ AAC‐LD Mono 64
•
Receive ‐ AAC‐LD Mono 64
•
Sample Rate : 48 kHz
•
Connect on one B channel only
When Xport is on POTS use the "Xport" Dial Mode selection on the dialing Xstream or Xport:
•
No configuration necessary
Comrex Nexus at far end
Use the following settings on the Xstream:
•
Transmit ‐ G.722
•
Receive ‐ G.722
•
Sample Rate ‐ Any
•
Connect on one B channel only.
USER'S MANUAL
Section 10: APPLICATIONS GUIDE 181