Telos Zephyr Xstream User Manual page 82

The illustration below shows several sample Dial Setups. Note that the notation "C" in the right
column indicates that a particular setup includes CODEC menu settings.
Creating Dial Setups – Step by step
1. Configure the Zephyr Xstream's CODEC menu as it will be used when
connected to this location. This step is optional, you can skip this step if you
are creating a Dial Setup that does not include codec settings
h
HOT TIP!
You will probably wish to include the CODEC settings in your Dial Setup. This allows you to
dial a variety of locations, each with differing codec requirements, without the need for
manual configuration.
2. (Optional) If you wish to include CODEC settings in your Dial Setup, you may
wish to dial the location in question now, to verify that your codec settings
are correct. If you choose to "include" the codec settings in step 8, the
current codec setting will be stored with the new setup.
3. Press the <AUTO> key. Choose the Dial Setup to be entered. Note: You can
edit an existing setup by selecting it.
To choose a Dial Setup you have two options:
•
Use the <5> and <6> to scroll through the list of 100 Dial Setups.
•
Or: Use the Keypad to enter the 2‐digit number (00 to 99) for the
desired setup. That setup will be displayed and will be highlighted.
4. Once the desired setup is highlighted, press the <SEL> button to allow entry
of (or editing of) the information for this setup. If an empty setup was
selected, "Empty Entry" will be displayed.
USER'S MANUAL
Section 4: BASIC OPERATION & INSTALLATION 70