Telos Zephyr Xstream User Manual page 208

Livewire
Since Livewire is one way of getting audio to and from your Xstream, we will discuss those menus here as
well. Please refer to Section 8 for details on configuration of Livewire.
These menus enable you to specify the Livewire streams being created by the codec ("sources" delivered
to the Livewire network) and the audio streams being delivered by the codec ("destinations" from the
Livewire network). Expert mode enables you to specify custom backfeeds if required.
Please see Section 8 for background on Livewire and more details on the Xstream configuration.
The basic setup gives you the option of specifying a channel number and name for each
the two stereo Livewire streams that can be created by the Xstream. The channel
numbers must be unique. The name can be any name you wish to use to describe the
codec. Try to choose a detailed name if you have more than one codec since this will be
beneficial when you are setting up your Axia system.
The Source Mode should be set to Livestream for minimum latency.
The backfeeds of the codec are set automatically in this mode. They will be set for the
same channel number as the source with "to source" as the mode. If you need to
specify a different backfeed, you will need to use the Expert Setup shown below.
USER'S MANUAL
Livewire – Basic Setup
Livewire – Expert Setup
Section 11: THE WORKS – Detailed Menu Reference 196