Usb Power Select; Panel Power Select - DFI KS104-CD User Manual

USB Power Select

JP4 and JP6 are used to select the power of the USB ports. Selecting +5V_standby will allow
you to use a USB device to wake up the system.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
Chapter 4 Hardware Installation
Chapter 4
1 2 3
USB 2-5 1 2 3
(JP6)
1-2 On: +5V 2-3 On:
+5V_standby
(default)
1
1
USB 0-1
2
2
(JP4)
3
3
1-2 On: +5V
2-3 On:
+5V_standby
(default)

Panel Power Select

JP2 is used to select the power supplied to the LCD panel.
Important:
Before powering-on the system, make sure JP2's setting matches the LCD panel's
specification. Selecting the incorrect voltage will seriously damage the LCD panel.
17
2 4 6
JP2
1 3 5
1-2 On: +12V
2 4 6
1 3 5
3-4 On: +5V
2 4 6
1 3 5
5-6 On: +3.3V
(default)
www.dfi .com