Yealink T5 Series User Manual page 99

Label Short Label
Configured
(for example,
aLine1)
(for example,
sunmy)
Blank
Procedure:
Click Dsskey->Line Key.
1.
Select the desired value from the pull-down list of Linekey length in short.
2.
Click Confirm.
3.
The following figure shows an example of label display when it is set to 2 chars:
• If the label contains uppercase characters or
digits, only the uppercase characters and
Blank digits are displayed. It displays two
characters from left to right (for example,
L1).
•else, it displays the first two characters of the
label (for example, su).
Blank
If both left blank, the default label is used. The
display rule is the same as above.
Customizing Your Phone
Description
87