Yealink T5 Series User Manual page 148

User Guide for T5 Series IP Phones
If you want to park the call against desired extension.
b)
Enter the extension (for example, 4606) where you want to park the call.
1)
Press the OK key or # key.
2)
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
From the Calls screen, you can also use a Call Park key (refer to
park the call to desired destination directly.
Note You can also press the desired BLF or BLF List key to park a call directly. For more information,
refer to Parking a Call/Retrieving a Parked Call to the Monitored User
Retrieving a Parked Call in FAC Mode
Procedure
:
Press Retrieve (You may need to press the More soft key to see the Retrieve soft key) on
1.
the pre-dialing screen.
The phone will dial the configured park retrieve code and the Retrieve screen is shown as
below:
Follow the voice prompt, do one of the following:
2.
Press the # key on the phone where the call is parked.
-
Enter the desired extension followed by # (for example, 4606#) on any phone.
-
From the Idle screen, you can also use a Park Retrieve key (refer to
Key) to retrieve the parked call from desired destination directly.
Note
You can also press the desired BLF or BLF List key to retrieve a parked call directly. For more
information, refer to
136
Parking a Call/Retrieving a Parked Call to the Monitored User
Configuring a Call Park Key) to
.
Configuring a Park Retrieve
.