Yealink T5 Series User Manual page 104

User Guide for T5 Series IP Phones
automatically on the phone.
Adding a Dial Now Rule
Procedure:
Click Settings->Dial Plan->Dial Now.
1.
Enter the desired value (for example, 2xx) in the Rule field.
2.
Enter the desired line ID in the Account field or leave it blank.
3.
The valid values for the Account field can be one or more digits, and every two digits must
be separated by a comma. For example, when you enter the value "1, 2" in the Account
field, this replace rule will apply to account 1 and account 2. If you leave the Account field
blank or enter 0, the replace rule will apply to all accounts. For more information on
available accounts of each phone, refer to Registration.
Click Add to add the dial now rule.
4.
You can also edit or delete the dial now rule, refer to
Note
Rule for more information.
Configuring Time Out for Dial Now Rule
You can configure the delay time for dial now rules. That is, if the entered number matches a dial
now rule, the phone will automatically dial out the phone number after designated delay time.
Procedure:
Click Features->General Information.
1.
92
Editing a Replace Rule or Deleting a Replace