Yealink T5 Series User Manual page 57

Hide thumbs Also See for T5 Series:
Table of Contents

Advertisement

Configuring the Idle Timeout
Idle Timeout specifies the period of time that the IP phone is idle before entering power-saving
mode. There are three different types of idle timeout:
Office Hours Idle TimeOut: Configures the idle timeout for office hours.
Off Hours Idle TimeOut: Configures the idle timeout for non-office hours.
User Input Extension Idle TimeOut: Configures idle timeout that applies after you use
the IP phone (for example, press a key on the phone or pick up/hang up the handset). You
can choose to set a higher User Input Extension Idle TimeOut than the Office Hours Idle
TimeOut and Off Hours Idle TimeOut so that when you're actively using the phone,
power-saving mode doesn't initiate as often.
By default, the Office Hours Idle Timeout is much longer than the Off Hours Idle TimeOut. If you
use the IP phone, the idle timeout that applies (User Input Extension Idle Timeout or Office
Hours/Off Hours Idle TimeOut) is the timeout with the highest value. If the phone has an
incoming call or new message, the User Input Extension Idle TimeOut is ignored.
Procedure:
Click Settings->Power Saving.
1.
Enter the desired value between 1 and 960 (minutes) in the Office Hours Idle TimeOut
2.
field.
Enter the desired value between 1 and 10 (minutes) in the Off Hours Idle TimeOut field.
3.
Enter the desired value between 1 and 30 (minutes) in the User Input Extension Idle
4.
TimeOut field.
Click Confirm.
5.
Customizing Your Phone
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sip-t54sSip-t52s

Table of Contents