If the network is secure, enter its password.
6.
Press OK.
7.
For more information on the password of the wireless network, contact your system
Note
administrator.
Connecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless
networks which can automatically configure a wireless network with a network name (SSID) and
strong WPA data encryption and authentication.
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
Push Button Configuration (PBC): The user simply has to press WPS key on both the IP
phone and gateway/router to connect.
Personal Identification Number (PIN): The user has to enter a PIN generated randomly
by the IP phone on the gateway/router to connect.
Push Button Configuration (PBC)
Procedure:
Navigate to Menu->Basic->Wi-Fi.
1.
Activate the Wi-Fi mode (refer to
2.
Press the WPS, and then select WPS.
3.
The LCD screen prompts "WPS has been activated, connect in 120s!".
Long press the WPS key on your gateway/router.
4.
Once WPS setup has completed successfully, the LCD screen will prompt "Connect
Success.".
Personal Identification Number (PIN)
Procedure:
Navigate to Menu->Basic->Wi-Fi.
1.
Available Features with Optional Accessories
Activating the Wi-Fi
Mode).
203