Yealink T5 Series User Manual page 137

If the forward on code or off code is configured, the IP phone sends the corresponding
code to the server when a certain action takes place. For example, if you set the Always
Forward on code to be *71 (may vary on different servers), and the target number to be
1234. When you activate Always Forward on the IP phone, the IP phone sends *711234 to
the server, and then the server will activate Always Forward feature on the server side,
hence being able to get the right status of the extension.
Do one of the following:
8.
If you want to activate call forward for all accounts, Highlight the Always
-
Forward/Busy Forward/No Answer Forward field and press the All Lines soft key.
Press OK.
If you want to activate call forward for the selected account, press Save.
-
When you activate call forward for the default account, the associated line icon changes to
and the icon
When you activate call forward for the non-default account, only the associated line icon will
change to
When you activate call forward for all accounts, all line icons changes to
appears on the status bar.
Deactivating Call Forward in Custom Mode
You can deactivate call forward when you no longer want to forward your calls from the specific
account.
Procedure:
Navigate to Menu->Features->Call Forward or press the TRANSFER key when the phone
1.
is idle.
The LCD screen displays a list of accounts registered on the phone.
Select a desired account.
2.
Select the desired forwarding type.
3.
Select Disabled from the Always Forward/Busy Forward/No Answer Forward field.
4.
Do one of the following:
5.
If you want to deactivate call forward for all accounts, press the All Lines soft key.
-
Press OK.
If you want to activate call forward for the selected account, press Save.
-
Configuring Forward Emergency and Authorized Numbers
You can still receive incoming calls from authorized numbers when call forward is activated.
appears on the status bar.
.
Basic Call Features
,
, and the icon
125