Aastra 400 Series System Manual page 429

Tab. 214 General mailbox settings
Parameter
Mailbox name
Number of rings before answer
Saving voice data on nodes
Language ID
Listen to voice message infor-
mation
Tab. 215 Notification to a system phone
Parameter
Notification of a new voice mes-
sage
Additional Notification to inter-
nal call number
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Value range Remarks
Mailbox name Mailbox name
<0..9> CFU delay until the voice mail system answers the call. With
Call Forwarding on No Reply (CFNR) the configured delay
must also be added.
<0..40> Indication of the node number if the messages and personal
greetings are to be stored on a node other than the one
where the terminal of the mailbox owner is currently
located. For IP terminals the master nodes are used if no indi-
cation. The configuration of other node numbers makes
sense, for example, for IP terminals at a satellite location
which has an exchange line circuit. (Relevant only in an AIN.)
Warning:
If the node is changed, all the mailbox's greetings and
voice messages are deleted!
<0..3 - lan- Here the mailbox is assigned one of a maximum of 3 loaded
guage> Audio Guide languages.
Requirements:
• A node is already assigned to the mailbox.
• Languages are already loaded on the node. (Only loaded
languages of the assigned node can be selected.)
Yes / No Here you select whether or not the date, time and call
number (CLIP) of the voice messages received should be
announced before the messages are played back.
Value range Remarks
Yes / No In addition to the entry in the call list a new voice message is
also signalled with a text message on the display of a system
phone, and the message LED lights up.
<Internal call A new voice message is also signalled with a text message
No.> on the display of another internal system phone and the
message LED lights up (user group numbers are also possi-
ble as destinations)
Features
429