Point-To-Point And Point-To-Multipoint Connections - Aastra 400 Series System Manual

2. 1. 1. 3

Point-to-Point and Point-to-Multipoint Connections

Basic accesses can be configured as point-to-point or as point-to-multipoint
Management setting in the configuration of the network interfaces).
Point-to-Multipoint Connection without a communication server
The basic access in point-to-multipoint configuration allows a selective dial-up of
the terminals connected in parallel using MSN, the Multiple Subscriber Number.
Here the network itself provides a kind of direct dialling, so to speak.
NT1: Network Termination
MSN: Multiple Subscriber Number
Fig. 3 Single basic access in point-to-multipoint configuration
Note:
The fax with ISDN connection is implemented as a fax card in a PC.
Default setting:
Digital network interfaces are set on point-to-point configuration.
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
System interfaces
(TEI
23