End-Of-Selection Signal - Aastra 400 Series System Manual

Features
9. 6. 3

End-of-selection signal

The input of an external number can be completed with the character #. The com-
munication server (or network system) interprets this as the end of selection and
immediately switches through.
Detailed Description
Dialling with end-of-selection signal is important in several cases:
• when dialling an external number in an open numbering plan
• when the LCR (Least Cost Routing) function is activated: In this case the commu-
nication server has to wait until the user has entered all the digits before it can
forward the complete number to the network provider configured. The end-of-
selection signal does not require any additional waiting time
• With SIP terminals on a communication server and a communication server con-
nected via an SIP provider to the public network. Without end-of-selection the
waiting time is 4 seconds.
Fig. 204 Dialling with end-of-selection signal
436
(Fig. 204).
(Fig. 205).
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013