Entering A Fixed Clip; Suppressing Clip / Colp (Clir / Colr) - Aastra 400 Series System Manual

System functions and features as of r3.0
Hide thumbs Also See for 400 Series:
Table of Contents

Advertisement

4. 4. 2

Entering a fixed CLIP

In practice a permanent CLIP number is used if the CLIP of the user concerned is al-
ways to remain the same in the public network, regardless of the path used for
routing an outgoing call. Break-out is a typical application (see
If a call goes out to the public network, the permanent CLIP number is retained un-
changed together with the numbering plan identifier NPI and the type of number
TON, even if the call is routed via another PINX (see example on
The CLIP number required, the numbering plan identifier NPI and the type of
number are entered in the user configuration. The
the user configuration, must be set on No.
E.164
is normally set for the numbering plan identifier NPI.
4. 4. 3

Suppressing CLIP / COLP (CLIR / COLR)

If
CLIR
=
Yes
has been set in the caller's user configuration, the information sent
along with the CLIP and COLP numbers specifies that they are not to be displayed
to the call's recipient (CLIR: Calling Line Identification Restriction, COLR: Connected
Line Presentation Restriction). In this case the network provider does not forward
the CLIP number to the recipient (the CLIP number may nonetheless be sent to a
number of public authorities, such as the police, see also
The same setting is also used to prevent the name being displayed to the call's re-
cipient. The suppression of CNIP (Calling Name Identification Presentation) and
CONP (Connected Name Identification Presentation) is called CNIR (Calling Name
Identification Restriction) and CONR (Connected Name Identification Restriction).
Depending on the network provider it may be necessary to subscribe to CLIR.
For each user CLIR can only be activated permanently or temporarily for one call
(see
"Suppression of the call number display", page
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Identification elements
page
270).
page
103).
Automatic CLIP
setting, also in
"Display CLIR", page 97
514).
).
85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

470415430

Table of Contents