Picking Up A Call - Aastra 400 Series System Manual

Features
Detailed Description
User B: Charge recall can only be activated from digital system phones with a dis-
play.
User A: At the end of the call, the user's exchange access is automatically barred
again.
Under Charge recall in the AMS Account Manager a time can be configured for
both standard and phone booth connections by which a charge recall is delayed
when the handset goes on-hook. This means that more than one exchange call can
be made before the charge recall is effected. If the configured time is greater than
zero, the internal user automatically obtains the exchange-free signal when he
picks up the handset again and is able to dial a new number directly. If the user
does not pick up the handset within the time delay, a charge recall is effected.
Tip:
Store charge recall (*32 phone booth No.) under a function key.
Function in prefix dialling
Tab. 244 Charge recall: Function
Function
Activate charge recall to standard connection
System configuration
Tab. 245 Charge recall: System configuration
Parameter
Charge recall: Standard
Charge recall: Phone booth
Reference to Other Features
Features:
• "Setting up phone booths",
page 553
9. 6. 10

Picking up a call

An incoming call from user A to user B can be fetched from any terminal C and then
answered.
450
Parameter value
0 to 120 seconds
0 to 120 seconds
Function code
*32 User No.
Remarks
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013