About The Data Backup Capacitor; Removing/Reinstalling Front Panel - Sony MKS-9011A Installation Manual

2-3. About the Data Backup Capacitor

A large capacitor is mounted on the CA-57 board of MKS-
9011A/9012A to back up the data of setup, shot box, time
line, and macro, etc.
Leave the main power of the MKS-9011A/9012A turned
on for two hours or longer to charge this capacitor.
The data is backed up for three days when the capacitor is
fully charged under normal operating temperature/humidi-
ty.
However, this time length changes depending on the
surrounding environment.
Be sure to save the important data into the external media.

2-4. Removing/Reinstalling Front Panel

w
Be sure to unplug the power cord before removing/
reinstalling the front panel.
Performing the procedure with the power on may cause
electric shock or damage to the boards.
Removal
1. Remove the two screws and remove the front panel.
B3 x 5
(This illustration shows MKS-9012A.)
CCP-9000A
Front panel
Reinstallation
1. Install the front panel in the reverse order of removal.
n
Fit the notches in the chassis into the grooves in the
front panel, then attach the front panel.
Notches
Grooves
B3 x 5
(This illustration shows MKS-9012A.)
Front panel
2-3