Sony MKS-9011A Installation Manual page 21

When the Horizontal connection is selected
(1) Connect the adaptor cases together.
(Be careful of the direction of the adaptor cases. See
the instruction given on the bottom of the adaptor
case.)
(2) Fix the top plate of the adaptor cases at the locations
shown in the illustration using the two connecting
screws and the two connecting plates B for every two
adaptor cases.
BV3 x 10
Instruction given on the
bottom of the cases
(3) Fix the bottom plate of the adaptor cases at the loca-
tions shown in the illustration using the 4 connecting
screws (BV3 x 10) and 2 of the connecting plates C
for every 2 adaptor cases.
n
When the Vertical connection (A) is selected, there are
several locations where the connecting plate C cannot
be fixed.
BV3 x 10
Adaptor cases
CCP-9000A
BV3 x 10
Connecting plates B
Adaptor cases
BV3 x 10
Connecting plate C
5. Install the side panel.
n
The screw positions that fix the side panel are different
in the connection methods (A), (B) and (C) respective-
ly. (Refer to Fig. 2 (on page 1-16).)
6. Install the operation module and fix it by tightening
the four screws on the sides.
7. For connection methods (A) and (B) (Refer to Fig. 2
(on page 1-16).), install the caps (L) and (R), and the
module cover in the direction of the arrow.
BV3 x 10
Cap (L)
For connection method (C) (Refer to Fig. 2 (on page 1-
16).), remove the four stepped screws and install the
panel covers (L) and (R).
Panel cover (L)
Panel cover (R)
Stepped
screws M3
Module covers
Cap (R)
BV3 x 10
Stepped screws M3
1-15