How To Connect The Mks-8075A - Sony MKS-9011A Installation Manual

5. Install the module covers.
n
For MKS-8031ATB, installation of the track ball is
required after the module is installed in steps 1 to 5.
Install the track ball by following the procedure below.
Module covers
Screws
(with drop-safe)
MKS-8075A
6. Rotate the ball cover counterclockwise to release the
lock. Then remove the ball cover.
7. Install the track ball and the ball cover.
8. Rotate the ball cover clockwise until it is locked.
CCP-9000A
Operation module
Screws
(with drop-safe)
Ball cover
Track ball
MKS-8031ATB

1-6-3. How to Connect the MKS-8075A

Structure of MKS-8075A (Extension adaptor)
Adaptor case :
Screw (BV3 x 10) :
Connecting plate A :
Connecting plate B :
Connecting plate C :
Panel cover (L) :
Panel cover (R) :
Cable (D-sub 50-pin):
m
. A maximum of three extension adaptors (maximum of
four when using the blank panel) can be connected either
horizontally, or vertically. (Up to two extension adaptors
can be connected horizontally.)
(For an example of connection, refer to Fig. 1.)
. There are three methods of vertical connection as
described below. (Refer to Fig. 2 (on page 1-16).)
Connection method A :
Install the extension adaptors on the panel so that
they have differences in height like a flight of steps
and with the same outside appearance as that of the
main panel.
Connection method B :
Install the extension adaptors flat on the panel with
no difference in height. (In such a case as installed
on tabletop)
Connection method C :
Install the extension adaptors in the rack. (Horizon-
tal connection is also required.)
. When extension adaptors are installed using both
horizontal and vertical connections, be sure to perform
the vertical connections first then perform the horizontal
connections.
. When the vertical connection (A) is selected, be sure to
secure all of the side panels with screws. Never place the
connected extension adaptors on it a table top. (The
fixing method is same as that of the main panel.)
Fig. 1
Number of
2
connections
: Blank panel
1
4
2
1
1
1
1
1
3 4
(Using the blank panel)
1-13