Introduction; General Information; Short Designation; Content Of This Manual - SEW-Eurodrive MOVI-C Controller Power UHX85A Manual

3

Introduction

3.1

General information

3.1.1

Short designation

The following short designations are used in this documentation:
Type designation
MOVI-C
3.1.2

Content of this manual

This manual describes:
•
•
•
•
•
•
•
3.1.3

Additional documentation

To be able to configure and startup the MOVI‑C
ively, you should also order the following documentation in addition to this manual:
•
•
•
When using the Windows memory card:
•
Always use the latest edition of documentation and software.
The SEW‑EURODRIVE website (www.sew‑eurodrive.com) provides a wide selection
of documents for download in various languages. If required, you can also order prin-
ted and bound copies of the documentation from SEW‑EURODRIVE.
®
CONTROLLER power UHX85A
The installation of the MOVI‑C
The interfaces and LEDs of the MOVI-C
The engineering access to the MOVI‑C
The installation of the Windows memory card
The interfaces of the MOVI‑C
dows memory card
The first boot process of the Windows memory card
Configuration and startup of the MOVI‑C
face
"Automation with MOVI-C
®
"MOVIDRIVE modular application inverter" product manual
®
"MOVIDRIVE system application inverter" product manual
Observe the Microsoft documentation exclusively for the configuration and opera-
tion of the Windows operating system.
Short designation
MOVI-C
®
CONTROLLER
®
CONTROLLER
®
CONTROLLER
®
CONTROLLER used in connection with the Win-
®
CONTROLLER with the fieldbus inter-
®
CONTROLLER simply and effect-
®
CONTROLLER" manual
Manual – MOVI-C
Introduction
General information
®
CONTROLLER
®
CONTROLLER power UHX85A
3
13