Scanning The Network For Devices - SEW-Eurodrive MOVI-C Controller Power UHX85A Manual

Power controller with ethernet/ip fieldbus interface

Hide thumbs Also See for MOVI-C Controller Power UHX85A:

Table of Contents

5.3.2

Scanning the network for devices

Proceed as follows:

ü The connection between the engineering PC and MOVI-C

1. Start MOVISUITE

2. Create a new MOVISUITE

3. Select the network type (Ethernet) and activate the configured adapter (LAN con-

tablished.

nection). Apply the settings and perform the network scan.

Startup with EtherNet/IP™

Configuration of the EtherCAT®/SBusPLUS stations

project from a network scan.

Manual – MOVI-C

CONTROLLER is es-

9007216181236875

18014415924706187

CONTROLLER power UHX85A

Table of Contents

Do you have a question about the MOVI-C Controller Power UHX85A and is the answer not in the manual?