Electrical Installation; Required Preventive Measure; Bus Systems - SEW-Eurodrive MOVI-C Controller Power UHX85A Manual

Safety notes
2

Electrical installation

2.8 Electrical installation
2.8.1

Required preventive measure

2.9

Bus systems

12
®
Manual – MOVI-C
Ensure that all of the required covers are correctly attached after carrying out the elec-
trical installation.
Make sure that preventive measures and protection devices comply with the applic-
able regulations (e.g. EN 60204-1 or EN 61800-5-1).
Make sure that the product is correctly attached to the ground connection.
A bus system makes it possible to adapt electronic drive technology components to
the particulars of the machinery within wide limits. There is a risk that a change of pa-
rameters that cannot be detected externally may result in unexpected (but not uncon-
trolled) system behavior and may have a negative impact on operational safety, sys-
tem availability, or data security.
Ensure that unauthorized access is prevented, especially with respect to Ethernet-
based networked systems and engineering interfaces.
Use IT‑specific safety standards to increase access protection to the ports. For a port
overview, refer to the respective technical data of the device in use.
CONTROLLER power UHX85A