Serial Port Console Redirection - Supero FatTwin F517H6-FT User Manual

FatTwin F517H6-FT USER'S MANUAL
Onboard LAN Option ROM Select
This feature selects whether to load the iSCSI or PXE onboard LAN option ROM.
The options are iSCSI and PXE.
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
This feature is to enable or disable the onboard option ROMs. The default for LAN1
is Enabled. The default for LAN2 is Disabled.
Boots Graphics Adapter Priority
Use the feature to select the graphics controller to be used as the primary boot
device. The options are Offboard and Onboard.

Super IO Confi guration
Serial Port 1
Select Enabled to enable the onboard serial port. The options are Enabled and
Disabled.
Serial Port 1 Settings
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1. Select Auto to allow the serial port to automatically assign system
resources. The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, (IO=2F8h; IRQ=3), (IO=3E8h; IRQ=5), (IO=2E8h; IRQ=7), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 10, 11, 12;), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;), (IO=3E8h;
IRQ=3, 4, 5, 6, 7, 10, 11, 12;), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;)
 Serial Port Console Redirection
COM 1, SOL
These two submenus allow the user to confi gure the following Console Redirection
settings for a COM Port specifi ed by the user.
COM1, SOL Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. The default setting for COM1 is Disabled,
and for SOL is Enabled.
7-12